imageCLASS MF6540/MF6590/MF6595/MF6595CX Reference Guide

1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
10-11
Before Using the
Machine
Document and Paper
Copying
Sending and Receiving (MF6595cx/
MF6595/MF6590 Only)
Printing and
Scanning
Network (MF6595cx/MF6595/
MF6590/MF6540 Only)
Remote UI (MF6595cx/MF6595/
MF6590/MF6540 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
NO APPROPRIATE SIZE
Description Although <PAPER SELECT> is set to <AUTO>
in <STANDARD SETTINGS> in the <COPY
SETTINGS> menu, appropriate-sized paper is not
set in the paper cassette nor on the multipurpose
tray.
Action Select the paper size, or set the copy ratio. If you
press [Start] while this message is displayed,
the paper with the least margin is selected
automatically and printing starts.
NOT AVAILABLE NOW
Description You pressed the one-touch speed dialing key
or coded speed dialing code that has already
been registered, while you perform group dial
registration.
You pressed the group dialing that has already
been registered, while you perform one-touch
or coded speed dialing registration.
–
–
Action Register the key or number that is not used for
the speed dialing.
Description You have specified the group dialing when the
line is off the hook.
Action Specify the recipient other than group dialing.
NOT REGISTERED
Description The telephone number you attempted to
dial using a speed dialing function was not
registered.
Action Register the telephone number before using the
speed dialing function.
OUTPUT TRAY FULL
Description The paper delivery tray is full of paper.
Action Remove the printouts from the paper delivery
tray.
PAPER JAM
Description Paper jams have occurred in the machine.
Action Remove the jammed paper.
The cover must be opened and closed to resume
the current job. If this message disappears while
printing from a PC, press [Start] to bring the
printer back on-line.
PLATEN GLASS DIRTY
CLEAN PLATEN GLASS
Description The ADF scanning area on the left side of the
platen glass may be dirty.
Action Clean the ADF scanning area, then press [OK].