MF6595CX Reference Guide

ManualsBrandsCanon ManualsCopierimageCLASS MF6540

111

112

113

114

115

116

117

118

119

120

Back

TOP

6-9

Before Using the

Machine

Document and Paper

Copying

Sending and Receiving (MF6595cx/

MF6595/MF6590 Only)

Printing and

Scanning

Network (MF6595cx/MF6595/

MF6590/MF6540 Only)

Remote UI (MF6595cx/MF6595/

MF6590/MF6540 Only)

System Settings

Maintenance

Troubleshooting

Appendix

Index

Table of Contents

Dedicated Port

To set or browse detailed information on the machine with a Canon

printer driver or utility, set <DEDICATED PORT> to <ON>.

The default setting is <ON>.

If you want to use a Canon printer driver or utility, select <ON> for both

<USE SNMP> and <DEDICATED PORT>.

You can restrict the IP addresses of computers on which items can be set

or browsed. If you restrict the IP addresses, it is not possible to use the

Remote UI to set or browse detailed information on computers other

than those whose IP addresses are allowed, even if both <USE SNMP>

and <DEDICATED PORT> are <ON>. For details, see “IP Address Range

Settings,” on p. 6-16.

1. Press [Additional Functions].

2. Press [ ] or [ ] to select <SYSTEM

SETTINGS>, then press [OK].

3. Press [ ] or [ ] to select <NETWORK

SETTINGS>, then press [OK].

4. Press [ ] or [ ] to select <DEDICATED

PORT>, then press [OK].

–

5. Press [ ] or [ ] to select <ON> or <OFF>,

then press [OK].

<ON>: If you want to set or browse detailed information on the

machine with a Canon printer driver or utility.

<OFF>: If you are not using a Canon printer driver or utility.

6. Press [Stop] to return to the standby mode.

7. Restart the machine.