imageCLASS MF6540/MF6590/MF6595/MF6595CX Basic Operation Guide

3-19
Copying
6 Use the numeric keys to enter the desired copy quantity (1 to 99).
7 Press [Start].
When you set the document on the platen glass, press [Start] for each page. When scanning is
complete, press [OK].
To cancel all settings, press [Reset].
When you switch the mode by pressing the mode keys such as [FAX], all settings will be also
canceled. If you want to keep the settings, store the settings in <STANDARD SETTINGS> in <COPY
SETTINGS>, See “STANDARD SETTINGS,” on p. 12-10.
Instead of performing step 5, you can just press [OK]. In this case, the machine makes <BOOK TYPE>
copies.
–
–
–