imageCLASS MF6540/MF6590/MF6595/MF6595CX Basic Operation Guide

Document and Paper
2-2
Document Requirements
Platen Glass ADF
Type Plain paper
Thick documents
Photographs
Small documents (e.g., index cards)
Special types of paper (e.g., tracing
paper*
1
, transparencies*
1
, etc.)
Books (Height: max. 3/4" (20 mm))
–
–
–
–
–
–
Plain paper (Multi-page documents of
the same size, thickness and weight or
one page documents.)
Size (W x L) Max. 8 1/2" x 14"
(Max. 216 x 356 mm)
Max. 8 1/2" x 14"
(Max. 216 x 356 mm)
Min. 5 1/2" x 5"
(Min. 139.7 x 128 mm)
Weight Max. 4.4 lb (2 kg) 13 to 34 lb bond (50 to 128 g/m
2
)
(one-sided documents)
13 to 28 lb bond (50 to 105 g/m
2
)
(two-sided documents)
Quantity 1 sheet Max. 50 sheets*
2
(Max. 25 sheets for LGL documents)
*
1
When copying transparent documents such as tracing paper or transparencies, use a piece of plain white
paper to cover the document after placing it face-down on the platen glass.
*
2
21 lb bond (80 g/m
2
) paper
Do not place the document on the platen glass or in the ADF until the glue, ink or
correction fluid on the document is completely dry.
To prevent document jams in the ADF, do not use any of the following:
Wrinkled or creased paper
Carbon paper or carbon-backed paper
Curled or rolled paper
Coated paper
Torn paper
Onion skin or thin paper
Documents with staples or paper clips attached
Paper printed with a thermal transfer printer
Transparencies
●
●
–
–
–
–
–
–
–
–
–