imageCLASS MF6540/MF6590/MF6595/MF6595CX Basic Operation Guide

Machine Settings
12-30
SYSTEM SETTINGS
2. SNMP SETTINGS Sets detailed information about SNMP.
1. USE SNMP Sets whether to activate SNMP.
ON (PORT NO.)
OFF
–
–
2. COMMUNITY NAME 1 Sets SNMP community name 1.
3. COMMUNITY NAME 2 Sets SNMP community name 2.
4. SNMP WRITABLE 1 Enables computers on the network to access the machine and
modify its settings.
ON
OFF
–
–
5. SNMP WRITABLE 2 Enables computers on the network to access the machine and
modify its settings.
OFF
ON
–
–
3. DEDICATED PORT Sets or browses detailed information on the machine with a
Canon printer driver or utility.
ON
OFF
–
–
4. ETHERNET DRIVER Specifies the type of network connection.
1. AUTO DETECT Selects the detection method of Ethernet driver.
AUTO Sets the machine to determine the communication mode (Half
duplex/Full duplex) and Ethernet type (10Base-T/100Base-TX)
automatically.
MANUAL Sets the communication mode and Ethernet type manually.
1. DUPLEX Selects the communication mode.
HALF DUPLEX
FULL DUPLEX
–
–
2. ETHERNET
TYPE
Selects the Ethernet type.
10 BASE-T
100 BASE-TX
–
–