imageCLASS MF6540/MF6590/MF6595/MF6595CX Basic Operation Guide

12-29
Machine Settings
SYSTEM SETTINGS
7. USE HTTP Sets whether to activate HTTP (HyperText Transfer Protocol) for
the Remote UI.
ON (PORT NO.)
OFF
–
–
8. SET IP ADD RANGE Sets whether to restrict the range of IP addresses.
OFF Disables restriction of IP address of computers.
ON Enables restriction of IP address of computers from which data
(print/fax jobs) can be sent to the machine.
1. PERMIT/
REJECT
Selects whether to permit or reject access from a specified IP
address.
REJECT
PERMIT
–
–
2. SET IP
ADDRESS
Specifies the IP address range. <START IP ADDRESS> and <END
IP ADDRESS> must be entered for each setting.
1. IP ADDRESS 1
2. IP ADDRESS 2
3. IP ADDRESS 3
4. IP ADDRESS 4
–
–
–
–
9. RX MAC ADD SET. Sets whether to activate a MAC address filter.
OFF Disables MAC address filter.
ON Specifies a MAC address filter to access. MAC address must be
entered for each setting.
1. PERMIT RX ADD1
2. PERMIT RX ADD2
3. PERMIT RX ADD3
4. PERMIT RX ADD4
5. PERMIT RX ADD5
–
–
–
–
–