imageCLASS MF5700 Series Software Guide

Setting Preferences and Scanning with ScanGear MF
3-30
Scanning
3
■ [Reduce Dust and Scratches]
Scanned photos may contain white dots caused by dust and scratches. This setting
reduces the dust and scratches on photos. The default setting is [OFF].
IMPORTANT
• You cannot set [Descreen] to [ON] if [Black and White] or [Text Enhanced] is selected in
[Color Mode].
• For scanning printed materials, the [OFF] setting is recommended.
• If [Descreen] is set to [ON], you cannot set [Reduce Dust and Scratches] to [ON].
• This setting may not be effective for some types of photos.
[OFF] No reduction of dust and scratches will be made.
[Low] Reduces small dust and scratch marks. With this setting, large dust or
scratch marks may remain.
[Medium] Normally this setting is recommended.
[High] Reduces large dust and scratch marks but evidence of the reduction
process may remain and may also remove delicate parts of the image.