imageCLASS MF5750/MF5770 Facsimile Guide

Setting the Receive Mode
5-6
Receiving Faxes
5
Setting the Ring Pattern
Your telephone company will assign a distinctive ring pattern to each number when
you order the DRPD service. Follow this procedure to set the fax ring pattern that
matches the pattern assigned by the telephone company:
1 Make sure you have set the receive mode to <DRPD>. (See
“Setting the Receive Mode,” on p. 5-1.)
2 Press [Menu].
3 Press [ (-)] or [ (+)] to select <FAX SETTINGS> ➞ press [Set].
4 Press [ (-)] or [ (+)] to select <RX SETTINGS> ➞ press [Set].
5 Press [ (-)] or [ (+)] to select <DRPD:SELECT FAX> ➞ press
[Set].
6 Press [ (-)] or [ (+)] to select a ring pattern ➞ press [Set].
• You can select from the following:
- <NORMAL RING>
- <DOUBLE RING>
- <SHORT-SHORT-LONG>
- <SHORT-LONG-SHORT>
- <OTHER RING TYPE>
7 Press [Stop/Reset] to return to the standby display.
DRPD:SELECT FAX
DOUBLE RING
RX SETTINGS
4.INCOMING RING
➞