imageCLASS MF5730 Set-Up Instructions

3 Attach the extension to the cassette.The slots
➊ are keyed and must be inserted at a 90°
angle. Once inserted, fold the extension as
shown ➋.
4 Pinch and slide the rear paper end guide to
match the size of paper.
NOTE
●
Confirm that the paper guide is fitted in the paper size
slit correctly.
5 Load the paper into the cassette. Make sure
the paper stack sits below the hooks (A)
.
6 Pinch and slide the side paper end guides to
match the size of paper.
A
To load Legal-size paper:
Pull the blue tab ➊ and extend the cassette ➋ as far as it will go. Keep the rear paper end guide to LT R
size mark. If you are not using Legal-size paper, skip to the next step without extending the cassette.
E227ME (MF5730) US2 SI.qxd 2/1/05 11:57 AM Page 3