imageCLASS MF5700 Series Software Guide

Installing Software on Your Computer
1-4
Installation
1
Installing Software on Your Computer
This section provides installation procedure of drivers to use the Canon
imageCLASS MF5700 Series as a network or a local printer, fax and a local
scanner (connected directly to your computer). (Fax function is available for the
MF5750/MF5770 models only.)
When installing the drivers, follow the steps shown in the [MF5700 Series Setup]
screen.
Before you install the software, be sure to:
• Confirm the machine is not connected to your computer.
• Turn on the machine. (See the Set-Up Instructions (for MF5730/MF5750 users) or
Set-Up Instructions for the Machine (for MF5770 users).)
• Quit any Windows application running on your computer.
IMPORTANT
If you are using Windows 2000/XP/Server 2003, be sure to log on as a member of
Administrators.
NOTE
• Use of a cable 9.8 ft (3 m) long or less is recommended.
• The screen shots shown are from Windows XP. However, the installation procedure is
essentially the same for other versions of Windows.