imageCLASS MF5700 Series Software Guide

Setting Preferences and Scanning with ScanGear MF
3-22
Scanning
3
Simple Mode Toolbar
With the Simple Mode Toolbar, you can make adjustments to the preview image
and also select a part of the image displayed.
■ To Detach and Move the Toolbar
To detach the toolbar from the [ScanGear MF] dialog box, click and hold on the
edge of the toolbar, then drag the Toolbar. It will return to its original position if you
double-click on the title of the toolbar.
The toolbar will adhere to a position if you drag it to the left or right of the preview
area or the bottom frame.
[Output Size
Name]
Specifies the output size name you want to register.
[Width] Specifies the width of the output size.
[Height] Specifies the height of the output size.
[Unit] Selects the unit of measurement for the output size.
[Add] Adds the output size to the [Output Size List].
[Delete] Deletes the selected output size from the [Output Size List].
This button is disabled for this model.
(Auto Crop) Crops the image border automatically. For details, see “Advanced Mode
- Specifying the Parameters of a Scan,” on p. 3-25.
(Flip) Flips the scanned image horizontally.
(Left Rotate) Rotates the scanned image 90 degrees left.
(Right Rotate) Rotates the scanned image 90 degrees right.
(Information) Lists the scanning information.