Specifications

Making Copies
5-2
Copying
5
Making Copies
Follow this procedure to make copies:
1 Place the document on the platen glass or load it in the ADF.
For details on how to place or load documents, see "Setting Up Documents," on p. 3-3.
2 Press [COPY].
3 Use the numeric keys to enter the number of copies.
You can set up to 99 copies.
4 Adjust any necessary settings for your document.
• Press [Image Quality] to select the scanning resolution. (See "Adjusting the Image
Quality (Resolution)," on p. 5-8.)
• Press [Exposure] to select the scanning exposure. (See "Adjusting the Exposure
(Density)," on p. 5-9.)
• Press [Enlarge/Reduce] to select the copy ratio. (See "Setting Enlarging/Reducing,"
on p. 5-6.)
5 Press [Start].
NOTE
To cancel copying, press [Stop/Reset].