User Guide

12-37
Machine Settings
SYSTEM SETTINGS
10. PORT NO. Sets the port number settings.
1. LPD 0~65535 (default:515)
2. RAW 0~65535 (default:9100)
3. HTTP 0~65535 (default:80)
4. SMTP RX 0~65535 (default:25)
5. POP3 RX 0~65535 (default:110)
6. SMTP TX 0~65535 (default:25)
7. SNMP 0~65535 (default:161)
11. SET IP ADD RANGE Sets whether to restrict the range of IP addresses.
OFF Disables restriction of IP address of computers.
ON Enables restriction of IP address of computers from which data
(print/fax jobs) can be sent to the machine.
1. PERMIT/
REJECT
Selects whether to permit or reject access from a specified IP
address.
REJECT
PERMIT
–
–
2. SET IP
ADDRESS
Specifies the IP address range. <START IP ADDRESS> and <END
IP ADDRESS> must be entered for each setting.
1. IP ADDRESS 1
2. IP ADDRESS 2
3. IP ADDRESS 3
4. IP ADDRESS 4
–
–
–
–
12. PERMIT RX MAC ADD Sets whether to activate a MAC address filter.
OFF Disables MAC address filter.