imageCLASS MF4690 Reference Guide

1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
4-12
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
4 . Press [ ] or [ ] to select a one-touch key (01
to 08) or coded dial code (000 to 191) for which
you want to register the address, then press
[OK].
You can also select a one-touch key or coded dial code by pressing
the corresponding one-touch key, or [Coded Dial] followed by the
desired three-digit code.
5. Press [ ] or [ ] to select <E-MAIL>, then
press [OK].
6. Press [ ] or [ ] to select <E-MAIL ADDRESS>,
then press [OK].
7. Enter the address you register (max. 120 digits)
with the numeric keys, then press [OK].
To register another one-touch key or coded dial code, repeat the
procedure from step 4.
E-MAIL ADDRESS :a
[e-mail]
Ex.
_
8. Press [ ] or [ ] to select <NAME>, then press
[OK].
9. Enter the destination name (max. 16 letters,
including spaces) with the numeric keys, then
press [OK].
NAME :a
Can
Ex.
10. Press [Stop/Reset] to return to the standby
mode.
Registering File Server Addresses
1. Press [Additional Functions].
2. Press [ ] or [ ] to select <ADDRESS BOOK
SET.>, then press [OK].
3. Press [ ] or [ ] to select <1-TOUCH SPD
DIAL> or <CODED SPD DIAL>, then press [OK].