imageCLASS MF4690 Reference Guide

1
2
3
4
5
6
7
8
9
10
11
Back
Previous
Next
TOP
11-43
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Table of Contents
Index
SYSTEM SETTINGS
4. AUTH/ENC SETTINGS Specifies authenticating method before sending e-mail.
1. POP BEFORE SEND Sets whether to use the SMTP server requires POP before SMTP (method for authenticating
users who have logged in the POP server before sending e-mail).
OFF
ON
–
–
2. SMTP AUTH Sets whether to use the SMTP server requires SMTP Authentication (method for authenticating
users who have logged in the POP server before sending e-mail).
OFF Disables SMTP Authentication.
ON Enables SMTP Authentication.
1. USER
2. PASSWORD
–
–
5. E-MAIL ADDRESS Enters the e-mail address your machine will use (max. 64 characters).
6. POP SERVER Enters the POP server IP address or name (max. 48 characters).
7. POP ADDRESS Enters the login name for access to the POP server (max. 32 characters).
8. POP PASSWORD Enters the password for access to the POP server (max. 32 characters).
9. POP INTERVAL Sets the interval you want the POP server to check for incoming e-mail. If the interval is set to 0,
the POP server is not checked automatically (0MIN.–99MIN.).
8. STARTUP TIME SET. Sets the time period required to delay the startup of network communications for the machine
(0SEC–300SEC).
6. COMMUNICATIONS Sets the fax and e-mail communication.
1. E-MAIL SETTINGS Sets the e-mail communications.