imageCLASS MF4690 Reference Guide

1
2
3
4
5
6
7
8
9
10
11
Back
Previous
Next
TOP
11-40
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Table of Contents
Index
SYSTEM SETTINGS
12. PERMIT RX MAC ADD Sets whether to activate a MAC address filter.
OFF Disables MAC address filter.
ON Specifies a MAC address filter to access. MAC address must be entered for each setting.
1. PERMIT RX ADD1
2. PERMIT RX ADD2
3. PERMIT RX ADD3
4. PERMIT RX ADD4
5. PERMIT RX ADD5
–
–
–
–
–
2. USE SMB CLIENT Sets the SMB settings to use the machine on a NetBIOS network.
OFF SMB client is not used.
ON SMB client is used.
1. SERVER Enters the NetBIOS name of the machine.
2. WORKGROUP Enters the name of the workgroup the machine belongs to.
3. COMMENT Enters a comment about the printer.
4. LM ANNOUNCE Sets if the machine notifies the LAN Manager of its existence.
OFF
ON
–
–