imageCLASS MF4690 Reference Guide

1
2
3
4
5
6
7
8
9
10
11
Back
Previous
Next
TOP
11-39
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Table of Contents
Index
SYSTEM SETTINGS
2. RAW 0~65535 (default:9100)
3. HTTP 0~65535 (default:80)
4. SMTP RX 0~65535 (default:25)
5. POP3 RX 0~65535 (default:110)
6. SMTP TX 0~65535 (default:25)
7. SNMP 0~65535 (default:161)
11. SET IP ADD RANGE Sets whether to restrict the range of IP addresses.
OFF Disables restriction of IP address of computers.
ON Enables restriction of IP address of computers from which data (print/fax jobs) can be sent to
the machine.
1. PERMIT/REJECT Selects whether to permit or reject access from a specified IP address.
REJECT
PERMIT
–
–
2. SET IP ADDRESS Specifies the IP address range. <START IP ADDRESS> and <END IP ADDRESS> must be entered
for each setting.
1. IP ADDRESS 1
2. IP ADDRESS 2
3. IP ADDRESS 3
4. IP ADDRESS 4
–
–
–
–