imageCLASS MF4690 Reference Guide

1
2
3
4
5
6
7
8
9
10
11
Back
Previous
Next
TOP
11-18
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Table of Contents
Index
TX/RX SETTINGS
RING COUNT Sets the number of incoming rings before the machine answers. (1TIMES–99TIMES)
OFF The telephone does not ring when the machine receives a fax. (In the Sleep mode, the
telephone may ring one or two times.)
5. REMOTE RX Sets whether to use remote receiving. (See “Remote Reception,” on p. 4-42.)
ON The machine enables remote receiving.
REMOTE RX ID You can dial a code on remote extension to start receiving a document.
A combination of two characters using 0 to 9, * and # is possible.
OFF The machine disables remote receiving.
6. MANUAL/AUTO Sets whether the machine switches to the document receive mode after the external telephone
rings for a specified length of time in the manual receive mode.
OFF The external telephone keeps ringing until someone answers the call manually.
ON The machine switches to the document receive mode after the external telephone rings for a
specified time.
F/T RING TIME Sets the length of time to elapse before the machine switches to document receiving. (1SEC–
99SEC)