imageCLASS MF4690 Reference Guide

1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
10-19
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
PHONE OFF HOOK
HANG UP PHONE
Description The external telephone is off the hook.
Action Hang up the external telephone.
PLATEN GLASS DIRTY
CLEAN PLATEN GLASS
Description The ADF scanning area on the left side of the
platen glass may be dirty.
Action Clean the ADF scanning area, then press [OK].
PREPARING SCANNER...
PLEASE WAIT
Description The machine is not ready for scanning.
Action Wait until the machine is ready.
SAME FILE NAME
Description The same file name exists when you are scanning
a document to a USB memory.
Action Press [OK] and rename the file.
START AGAIN
Description A transmission error has occurred because the
line condition was poor.
Action Check the line condition, then try again.
STOP KEY PRESSED
PRESS OK KEY
Description [Stop/Reset] has been pressed while scanning
the document using the ADF.
Action Press [OK], then set the document again.
SYSTEM ERROR
Description Some kind of error has occurred in the machine.
Action Turn off the main power switch, wait for more
than 10 seconds, then turn it on again. If the
message persists, turn off the main power switch,
disconnect the power cord, and contact Canon
Customer Care Center.
TONER COVER OPEN
CLOSE COVER
Description A cover is open.
Action Check the cover, and make sure that it is
completely closed.