imageCLASS MF4690 Reference Guide

1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
4-45
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
7. Press [ ] or [ ] to select <RX REDUCTION>
or <REDUCE DIRECTION>, then press [OK].
If you select <REDUCE DIRECTION>, skip to step 11.
8. Press [ ] or [ ] to select <AUTO> or <FIXED
REDUCTION>, then press [OK].
If you select <AUTO>, adjust the image reduction automatically. Skip
to step 10.
9. Press [ ] or [ ] to select a preset reduction
ratio (90%, 95%, 97 %, or 75%), then press [OK].
10. Press [ ] or [ ] to select <REDUCE
DIRECTION>, then press [OK].
11. Press [ ] or [ ] to select <VERTICAL ONLY>
or <HORIZ & VERTICAL>, then press [OK].
<VERTICAL ONLY>: Reduces the document vertically only.
<HORIZ & VERTICAL>: Reduces the document both horizontally and
vertically.
12. Press [Stop/Reset] to return to the standby
mode.