imageCLASS MF4690 Reference Guide

1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
4-43
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
3. Press [ ] or [ ] to select <FAX SETTINGS>,
then press [OK].
4. Press [ ] or [ ] to select <RX SETTINGS>,
then press [OK].
5. Press [ ] or [ ] to select <REMOTE RX>, then
press [OK].
6. Press [ ] or [ ] to select <ON>, then press
[OK].
7. Press [Clear] twice to delete the default remote
reception ID of 25.
8. Use the numeric keys to enter a new remote
reception ID (a combination of two characters
using 0 to 9, and #), then press [OK].
9. Press [Stop/Reset] to return to the standby
mode.
Receiving a Fax Remotely
1. When you receive a call, pick up the external
telephone.
2. Use the numeric keys to enter the two-digit
remote reception ID to start reception.
If the machine is set for pulse dialing, press [Tone] to switch to tone
dialing before pressing the remote reception ID.
3. When the reception is complete, hang up the
telephone.