imageCLASS MF4690 Reference Guide

1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
4-39
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
5. Press [ ] or [ ] to select <ON>, then press
[OK].
When you select <OFF>, the machine starts to print the received
documents in memory.
6. Press [ ] or [ ] to select <PASSWORD>, then
press [OK].
7. Use the numeric keys to enter the memory lock
reception password (up to seven digits), then
press [OK].
PASSWORD
1234567
Ex.
8. Press [ ] or [ ] to select <REPORT PRINT>,
then press [OK].
9. Press [ ] or [ ] to select <ON> or <OFF>,
then press [OK].
<OFF>: Does not print a RX report.
<ON>: Prints a RX report.
<RX REPORT> should also be set to <ON> so that RX reports are
automatically printed when documents are received in memory. For
instructions, see “RX REPORT,” on p. 11-50.
10. Press [ ] or [ ] to select <MEMORY RX
TIME>, then press [OK].
If you do not need to set the timer for memory lock, skip to step 16.
11. Press [ ] or [ ] to select <ON>, then press
[OK].
12. Press [ ] or [ ] to select <MEM RX START
TIME>, then press [OK].