imageCLASS MF4690 Reference Guide

1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
4-31
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
1. Press [Additional Functions].
2. Press [ ] or [ ] to select <TX/RX SETTINGS>,
then press [OK].
3. Confirm that <TX/RX COMMON SET.> is selected,
then press [OK].
4. Press [ ] or [ ] to select <TX SETTINGS>,
then press [OK].
5. Press [ ] or [ ] to select <SEND SETTINGS>,
then press [OK].
6. Press [ ] or [ ] to select <TX FILE NAME>,
then press [OK].
7. Use the numeric keys to enter the document’s
name (up to 24 characters), then press [OK].
8. Press [ ] or [ ] to select <SUBJECT>, then
press [OK].
9. Use the numeric keys to enter the subject (up to
40 characters), then press [OK].
10. Press [ ] or [ ] to select <MESSAGE TEXT>,
then press [OK].
11. Use the numeric keys to enter the message body
text (up to 140 characters), then press [OK].
12. Confirm that <REPLY-TO> is displayed, then
press [OK].
13. Use the numeric keys to enter the reply-to
address (up to 120 characters), then press [OK].
14. Press [ ] or [ ] to select <E-MAIL PRIORITY>,
then press [OK].
15. Press [ ] or [ ] to select the priority
(<NORMAL>, <LOW> or <HIGH>), then press
[OK].
16. Press [Stop/Reset] to return to the standby
mode.