imageCLASS MF4690 Reference Guide

1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
4-30
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
3. Press [ ] or [ ] to select <FAX SETTINGS>,
then press [OK].
4. Press [ ] or [ ] to select <TX SETTINGS>,
then press [OK].
5. Press [ ] or [ ] to select <AUTO REDIAL>,
then press [OK].
6. Press [ ] or [ ] to select <ON>, then press
[OK].
7. Press [ ] or [ ] to select <REDIAL TIMES>,
then press [OK].
8. Use [ ], [ ], or numeric keys to enter the
number of redials (1 to 10 times) the machine
will make, then press [OK].
9. Press [ ] or [ ] to select <REDIAL
INTERVAL>, then press [OK].
10. Use [ ], [ ], or numeric keys to enter
the time (2 to 99 minutes, in one-minute
increments) between redials, then press [OK].
11. Press [ ] or [ ] to select <TX ERROR
REDIAL>, then press [OK].
12. Press [ ] or [ ] to select <ON> or <OFF>,
then press [OK].
<ON>: Resends all pages if an error occurs during transmission.
<OFF>: Does not redial even if an error occurs during transmission.
13. Press [Stop/Reset] to return to the standby
mode.
Setting Detail Information (E-Mail/File
Server/USB Memory)
You can set the document’s name, a subject line, message body
text, and reply-to address, and e-mail priority common to all
sending jobs. The following settings will be effective when sending
documents depending on the sending method you select:
E-mail: <TX FILE NAME>, <SUBJECT>, <MESSAGE TEXT>, <REPLY-
TO>, <E-MAIL PRIORITY>
File server (SMB): <TX FILE NAME>, <MESSAGE TEXT>
USB: <TX FILE NAME>, <MESSAGE TEXT>.
■
–
–
–