imageCLASS MF4380dn/MF4370dn/MF4350d Basic Operation Guide.

Copying
4-14
Collating Copies
3
Press [Collate/2 on 1].
COLLATE
COLLATE/2 ON 1
If you want to use <COLLATE> and “2 on 1
Combination” (see p. 4-15) at the same time,
select <COLLATE+2 ON 1>, then press [OK].
If you want to use <COLLATE> and the 2-
sided copying at the same time, go to step 3
of “1 to 2-Sided Copying” (see p. 4-19), “2 to 2-
Sided Copying (MF4380dn Only)” (see p. 4-20)
or “2 to 1-Sided Copying (MF4380dn Only)”
(see p. 4-21).
4
Use – [numeric keys] to enter the
desired copy quantity (1 to 99).
TEXT/PHOTO 1
63% * LTR
5
Press [Start].
If you want to copy multiple documents using
the platen glass, place a document and press
[Start] once for each page. When scanning is
complete, press [OK]. The machine prints the
remaining sets of copies.
To cancel all settings, press [Stop/Reset].
When you switch the mode by pressing the
mode keys such as
[FAX], all settings will
be canceled. If you want to keep the settings,
set the collate mode as follows:
[Menu] → <COPY SETTINGS> → <STANDARD
SETTINGS> → <AUTO COLLATE> → <ON> (See
“COPY SETTINGS,” on p. 12-4.)”
When scanning multiple page documents,
<MEMORY FULL> may appear in the display
and scanning may be canceled. If this happens,
press
[Stop/Reset] to return to the standby
mode.
–
–
–
–
–