MF4350d Basic Operation Guide.

10-6

Maintenance

Cleaning the Machine

■ For MF4350d

Press [ ] or [ ] to select <FIX. UNIT

CLEANING>, then press [OK].

1 FIX.UNIT CLEANING

ADJUST./CLEANING

Cleaning starts.

Throw away the cleaning paper after use.

Scanning Area

Keep the scanning area clean to avoid dirty copies

or faxes to be sent.

When cleaning the machine, first turn OFF the main power

switch, and disconnect the power cord. Failure to observe these

steps may result in a fire or electrical shock.

Platen Glass

Clean the platen glass and the underside of the ADF

by following the procedure below.

Turn OFF the main power switch and

disconnect the power cord.

●

Open the ADF.

Clean the platen glass and the underside

of the ADF with a cloth dampened with

water. Then, wipe the area with a soft, dry

cloth.

Do not dampen the cloth too much, as this may

tear the document or damage the machine.