imageCLASS MF4380dn/MF4370dn/MF4350d Basic Operation Guide.

Fax
5-34
Specifying the Way of Printing When Toner Runs Out
Specifying the Way of Printing When Toner
Specifying the Way of Printing When Toner
Runs Out
Runs Out
This function enables you to continue printing received fax documents or reports when the
toner has run out.
The default setting is <OFF>.
When <CONT. PRINTING> is set to <ON>, the printed documents may be light or blurred because of lack of toner. The data is
erased when the documents are printed out, so you cannot print the same documents again.
1
Press [Menu].
2
Press [ ] or [ ] to select <FAX
SETTINGS>, then press [OK].
5 FAX SETTINGS
MENU
3
Press [ ] or [ ] to select <PRINTER
SETTINGS>, then press [OK].
5 PRINTER SETTINGS
FAX SETTINGS
4
Press [ ] or [ ] to select <CONT.
PRINTING>, then press [OK].
3 CONT. PRINTING
PRINTER SETTINGS
5
Press [ ] or [ ] to select <ON>, then
press [OK].
ON
CONT. PRINTING
6
Press [Stop/Reset] to return to the
standby mode.