imageCLASS MF4380dn/MF4370dn/MF4350d Basic Operation Guide.

Fax
5-11
Introduction to Using Fax Functions
5
Press [Stop/Reset] to return to the
standby mode.
If you cannot make telephone calls using an
external telephone when the receive mode is set
to <FAX/TEL>, make the settings described below.
[MENU] → <FAX SETTINGS> → <USER SETTINGS>
→ set <PUBLIC LINE> to <ADAPTER 1>.
If the problem persists, set <PUBLIC LINE> to
<ADAPTER 2>.
* The default setting is <DIRECT>.
If you set <PUBLIC LINE> to <ADAPTER 1> or
<ADAPTER 2>, do not connect the supplied telephone
cable directly to the wall jack and the telephone line
jack on the back side of the machine.
Setting the Current Date and Time
Setting the Current Date and Time
You can set the current date and time. The current
date and time settings are used as standard timer
settings for functions that require them.
1
Press [Menu].
2
Press [ ] or [ ] to select <TIMER
SETTINGS>, then press [OK].
8 TIMER SETTINGS
MENU
3
Press [ ] or [ ] to select <DATE&TIME
SETTING>, then press [OK].
1 DATE&TIME SETTING
TIMER SETTINGS
4
Use – [numeric keys] to enter the
date (month/day/year) and time (in 24-
hour format), then press [OK].
17:50 07 31 ‘08
DATE&TIME SETTINGS
5
Press [Stop/Reset] to return to the
standby mode.
Setting the Type of Telephone Line
Setting the Type of Telephone Line
Set the type of telephone line that is connected to
the machine.
If this setting is incorrect, you will be unable to
communicate with other machines. Make sure to
check the type of telephone line that you are using,
and make the correct setting.
The default setting is <TOUCH TONE>.
1
Press [Menu].
2
Press [ ] or [ ] to select <FAX
SETTINGS>, then press [OK].
5 FAX SETTINGS
MENU
3
Press [ ] or [ ] to select <USER
SETTINGS>, then press [OK].
2 USER SETTINGS
FAX SETTINGS
4
Press [ ] or [ > ] to select <TEL LINE
TYPE>, then press [OK].
3 TEL LINE TYPE
USER SETTINGS
5
Press [ ] or [ ] to select the
telephone line type, then press [OK].
TOUCH TONE
TEL LINE TYPE
<TOUCH TONE>: Tone dialing (default)
<ROTARY PULSE>: Pulse dialing
If you do not know the telephone line type,
call your telephone service provider for
details.
6
Press [Stop/Reset] to return to the
standby mode.
–
–
–