imageCLASS MF4270 Reference Guide

1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
4-21
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
6. Press [ ] or [ ] to select the number of
redials the machine will make, then press [OK].
REDIAL TIMES
2TIMES
Ex.
You can also enter values with the numeric keys.
Regardless of the number you entered, the machine makes only one
redialing attempt if it does not detect a busy signal.
7. Press [ ] or [ ] to select the time (in
minutes) between redials, then press [OK].
REDIAL INTERVAL
2MIN.
Ex.
You can also enter values with the numeric keys.
8. Press [Stop/Reset] to return to the standby
mode.
Checking Dialing Line
Checking dialing line function enables you to configure the setting
on whether to check for a dial tone.
The default setting is <OFF>.
1. Press [Additional Functions].
2. Press [ ] or [ ] to select <FAX SETTINGS>,
then press [OK].
3. Press [ ] or [ ] to select <TX SETTINGS>,
then press [OK].
4. Press [ ] or [ ] to select <DIALING LINE
CHCK>, then press [OK].
5. Press [ ] or [ ] to select <ON>, then press
[OK].
6. Press [Stop/Reset] to return to the standby
mode.
■