imageCLASS MF4270 Basic Operation Guide

12-13
Machine Settings
FAX SETTINGS
6. RX TERMINAL ID Sets whether to insert the machine’s fax number and the sender
information on received faxes.
OFF
ON
–
–
7. RX RESTRICTION You can reject faxes from senders with no fax/telephone
number in their sender information. (See Chapter 4, “Sending
and Receiving,” in the Reference Guide.)
OFF All receptions are conducted.
ON Receives the fax only from the sending fax machine that sends
the TSI signal.
5 PRINTER SETTINGS Sets the printer functions.
1. RX REDUCTION Sets whether to reduce or truncate the image when a faxed
page is larger than the size of paper loaded. (See Chapter 4,
“Sending and Receiving,” in the Reference Guide.)
ON Reduces the image to fit on the size of paper loaded.
OFF Retains the original size of the image.
CUT The image that is larger than 1-page record area is cut and not
recorded.
2. 2-SIDED PRINT Sets the type of two-sided printing for faxing. (See Chapter 4,
“Sending and Receiving,” in the Reference Guide.)
OFF
ON
–
–
3. CONT. PRINTING Sets whether to continue printing when toner has run out. This
function is only for printing fax documents and reports. (See
Chapter 4, “Sending and Receiving,” in the Reference Guide.)
OFF
ON
–
–