Specifications

1
2
3
4
5
6
TOP
Back Previous Next
1-13
Table of Contents
Index
Advanced Fax
Features
Advanced Copy
Features
System Monitor
Reports and Lists
Troubleshooting
Appendix
Registering Remote Reception ID
Follow this procedure if you want to change the default remote
reception ID of 25.
1. Press [Additional Functions].
2. Use [ ] or [ ] to select <FAX
SETTINGS>, then press [OK].
3. Use [ ] or [ ] to select <RX SETTINGS>,
then press [OK].
4. Use [ ] or [ ] to select <REMOTE RX>,
then press [OK].
5. Use [ ] or [ ] to select <ON>, then press
[OK].
6. Use the numeric keys to enter the remote
reception ID (00 to 99), then press [OK].
7. Press [Stop/Reset] to return to the standby
mode.
Receiving a Fax Remotely
The following procedure is available only when the machine
receives the tone signal.
1. When you receive a call, pick up the handset
of the external telephone.
2. Use the numeric keys to enter the two-digit
remote reception ID to start reception.
3. When the reception starts, put the handset of
the external telephone.