Specifications

1
2
3
4
5
6
TOP
Back Previous Next
1-8
Table of Contents
Index
Advanced Fax
Features
Advanced Copy
Features
System Monitor
Reports and Lists
Troubleshooting
Appendix
Receiving Features
You can set the receive mode that suits your needs. The
machine also provides the following receiving features:
memory reception, reception restriction, and remote
reception.
■ Setting the Receive Mode
To determine the right mode for you, see “Set the Machine for
Receiving Faxes (MF4140/MF4150 Only),” in the Starter Guide.
1. Press [Additional Functions].
2. Use [ ] or [ ] to select <FAX
SETTINGS>, then press [OK].
3. Use [ ] or [ ] to select <RX SETTINGS>,
then press [OK].
4. Use [ ] or [ ] to select <RX MODE>,
then press [OK].
5. Use [ ] or [ ] to select the desired
receive mode, then press [OK].
<FaxOnly>: Answers all calls as faxes and disconnects voice
calls.
<AnsMode>: Receives faxes automatically and records voice
messages, see “AnsMode: Additional Settings,” on p. 1-9.
<NET SWITCH>: Distinguishes between fax and voice calls.
<FaxTel>: Switches between fax and voice calls automatically.
For additional settings, see “FaxTel: Additional Settings,” on
p. 1-9.
<MANUAL>: Does not answer any calls. You have to manually
receive faxes.
NOTE
– For <FaxTel> or <MANUAL>, make sure the optional handset
or an external telephone is connected to the machine.
– For <AnsMode>, make sure an answering machine is
connected to the machine.
– The <NET SWITCH> mode is available for certain countries
only and requires subscription to a network switch service.
6. Press [Stop/Reset] to return to the standby
mode.