Specifications

1
2
3
4
5
6
TOP
Back Previous Next
1-7
Table of Contents
Index
Advanced Fax
Features
Advanced Copy
Features
System Monitor
Reports and Lists
Troubleshooting
Appendix
■ Checking Dialing Line
Checking dialing line function enables you to configure the
setting on whether to check for a dial tone.
1. Press [Additional Functions].
2. Use [ ] or [ ] to select <FAX
SETTINGS>, then press [OK].
3. Use [ ] or [ ] to select <TX SETTINGS>,
then press [OK].
4. Use [ ] or [ ] to select <DIALING LINE
CHCK>, then press [OK].
5. Use [ ] or [ ] to select <ON>, then press
[OK].
6. Press [Stop/Reset] to return to the standby
mode.
■ Dialing an Overseas Number (With
Pauses)
When you dial or register an overseas number, you may need to
insert a pause within the number.
1. Set documents.
Place the first page on the platen glass if you are not using the
ADF.
2. Press [FAX].
3. Adjust any necessary settings (fax
resolution, etc.) for your documents.
4. Use the numeric keys to dial the international
access code.
For details on international access codes, contact your local
telephone company.
5. If necessary, press [Redial/Pause] to enter a
2.5-second pause.
– <P> in the fax/telephone number represents 2.5-second
pause.
– For a longer pause, press [Redial/Pause] again.
6. Use the numeric keys to dial the country
code, the area code, and the fax/telephone
number of the recipient.
7. Press [Start].
When you set the documents on the platen glass, press [Start] for
each document. When scanning is complete, press [OK] to start
dialing.
=123P
Ex.