Specifications

1
2
3
4
5
6
TOP
Back Previous Next
1-6
Table of Contents
Index
Advanced Fax
Features
Advanced Copy
Features
System Monitor
Reports and Lists
Troubleshooting
Appendix
Dialing using the [R] Key
1. Set documents.
Place the first page on the platen glass if you are not using the
ADF.
2. Press [FAX].
3. Press [R] to access the outside line.
4. Use the numeric keys to enter the fax
number.
5. Press [Start].
When you set the documents on the platen glass, press [Start] for
each document. When scanning is complete, press [OK] to start
dialing.
■ Switching Temporarily to Tone Dialing
If your machine is set for pulse dialing, use the procedure below
to switch to tone dialing to use information services (e.g., banks,
airline reservations, and hotel reservations).
NOTE
To talk to the other party, you will need to connect the optional handset
or a telephone to the machine.
1. Press [FAX].
2. Press [Hook].
You can also lift the optional handset instead.
NOTE
Make sure to confirm the dial tone before entering a fax number.
If you enter the number before the dial tone can be heard, the call
may not be connected, or the wrong number may be dialed.
3. Use the numeric keys to dial the required
information service.
4. When the recorded message of the
information service answers, press [Tone] to
switch to tone dialing.
If you pressed [Hook] in step 2, you can pick up the optional
handset if you need to talk to the other party.
5. Use the numeric keys to enter the numbers
requested by the information service.
6. If you want to receive faxes, press [Start].
– When finished, the line is disconnected automatically and the
tone dialing is canceled.
– If you used the optional handset, hang up to disconnect the
call.
=R123
Ex.