imageCLASS MF4150 Starter Guide

11
Connect the Power Cord and Turn On the Machine Set the Date and Time
12
● Entering Information
– Numeric keys: Enters numbers.
– [ ] or [ ]: Moves the
cursor position.
– [OK]: Confirms the entry.
Connect the power cord into the rear socket and the
wall outlet, and press the [I] side of the main power
switch to ON.
The machine enters the standby mode.
1 Press [Additional
Functions].
2 U se [] or [] to
select <4 TIMER
SETTINGS>, then press
[OK].
3 Use [ ] or [ ] to
select <2 DATE&TIME
SETTING>, then press
[OK].
What if...
● <CLOSE COVER/PRINTER COVER> is displayed:
Make sure that the printer cover and scanning platform are closed properly. (See “Install Toner Cartridge,” on p. 5.)
● <TONER IS NOT SET/INSERT TONER> is displayed:
Make sure that the toner cartridge is installed properly. (See “Install Toner Cartridge,” on p. 5.)
● <LOAD PAPER> is displayed:
Make sure that paper is loaded in the machine. (See “Set Up the Paper Trays and Load Paper,” on p. 7.)
4 Use the numeric keys to
enter the time (in 24-hour
format) and date (month/
day/year), then press
[OK].
5 Press [Stop/Reset] to
return to the standby
mode.
NOTE
– You can select the date format
among three types listed below at
<3 DATE TYPE SELECT>.
– <MM/DD/YYYY>
– <DD/MM YYYY>
– <YYYY MM/DD>
– By default, <4 DAYLIGHT
SV.TIME> in the <4 TIMER
SETTINGS> menu is set to <ON>.
If you want to set <4 DAYLIGHT
SV.TIME> in the <4 TIMER
SETTINGS> menu to <OFF>, see
Chapter 1, “Before Using the
Machine,” in the Basic Guide.
Main power switch
TEXT/PHOTO 1
100% LTR
Ex.
[OK]
Numeric
Keys
[]
[]
[Stop/Reset]
[Additional
Functions]
Ex.
DATE&TIME SETTING
11:19 12 31 ´06
12