imageCLASS MF4150 Advanced Guide

1
2
3
4
5
6
TOP
Back Previous Next
5-6
Table of Contents
Index
Advanced Fax
Features
Advanced Copy
Features
System Monitor
Reports and Lists
Troubleshooting
Appendix
Q Did you dial the correct number?
A Check that you have the correct number.
Q Is the machine in the Sleep mode?
A Press [Energy Saver] to take the machine out of
the Sleep mode.
Q Is the recipient’s machine out of paper?
A Ask the recipient to make sure the paper is loaded
in the machine.
Q Are there other documents being sent from
memory?
A Allow time for the documents to finish sending.
Q Has an error occurred during transmission?
A Check the LCD for an error message. (See
Chapter 11, “Troubleshooting,” in the Basic Guide.)
A Print an Activity Report and check for an error.
(See “ACTIVITY REPORT,” on p. 4-5.)
Q Is the telephone cable connected properly?
A Make sure the cable is connected properly. (See
“Connect Telephone Cables,” in the Starter Guide.)
Q Is the telephone line working properly?
A Make sure there is a dial tone when you press
[Hook] or when you lift the handset of any external
telephone connected to the machine. If there is no
dial tone, contact your local telephone company.
Q Is the recipient’s machine a G3 fax machine?
A Make sure the recipient’s machine is compatible
with your machine.