imageCLASS MF4150 Advanced Guide

1
2
3
4
5
6
TOP
Back Previous Next
1-10
Table of Contents
Index
Advanced Fax
Features
Advanced Copy
Features
System Monitor
Reports and Lists
Troubleshooting
Appendix
5. Use [ ] or [ ] to select <DRPD>, then
press [OK].
6. Use [ ] or [ ] to select a ring pattern,
then press [OK].
<NORMAL RING>
<DOUBLE RING>
<SHORT-SHORT-LONG>
<SHORT-LONG-SHORT>
<OTHER RING TYPE>
7. Press [Stop/Reset] to return to the standby
mode.
FAX/TEL: Additional Settings
If required, change the additional settings as follows:
1. Press [Additional Functions].
2. Use [ ] or [ ] to select <FAX
SETTINGS>, then press [OK].
3. Use [ ] or [ ] to select <RX SETTINGS>,
then press [OK].
4. Use [ ] or [ ] to select <RX MODE>,
then press [OK].
5. Use [ ] or [ ] to select <FAX/TEL>, then
press [OK].
6. Use [ ] or [ ] to select the time (0 to 30
seconds) for the phone start ringing after
receiving a call, then press [OK].
You can also enter values with the numeric keys.
7. Use [ ] or [ ] to select the duration (10
to 45 seconds) of ringing, then press [OK].
You can also enter values with the numeric keys.
8. Use [] or [] to select the action the
machine will take after the ringing ends, then
press [OK].
<RECEIVE>: Switches to the receive mode.
<DISCONNECT>: Disconnects the call.
9. Press [Stop/Reset] to return to the standby
mode.