imageCLASS MF3200 Series Software Guide

1
2
3
4
5
6
TOP
Back Previous Next
2-18
Table of Contents
Index
Introduction
Printing
Scanning a
Document
PC Faxing
Troubleshooting
Appendix
Detailed Settings
Clicking [Details] in the [Quality] tab sheet opens the [Detailed
Settings] dialog box. This dialog box enables you to specify the
detailed settings for print quality.
[Details] Click this button to open the [Detailed
Settings] dialog box and make print quality
settings. (See “Detailed Settings,” on
p. 2-18.)
[Manual Grayscale
Settings]
Enables the manual grayscale. Selecting this
check box enables [Grayscale Settings] to
access the dialog box which enables you to
set the grayscale for images. (See
“Grayscale Settings,” on p. 2-19.)
[Grayscale
Settings]
Click this button after selecting the [Manual
Grayscale Settings] check box to manually
adjust the grayscale settings. The
[Grayscale Settings] dialog box allows you to
specify Brightness, Contrast, and Matching
Mode. (See “Grayscale Settings,” on
p. 2-19.)
NOTE
This option is enabled only when [Manual Grayscale Settings] is
selected.
[View Settings] Click this button to display the [View
Settings] dialog box. This dialog box allows
you to view and confirm all of the current
page settings in a listed form. (See “View
Settings,” on p. 2-25.)
[About] Displays the version information on the
driver.
[Restore Defaults] Resets all the current settings to their default
values.
[Resolution] Selects the printer’s resolution in dot per
inch (600 dpi or 300 dpi).