imageCLASS MF3200 Series Software Guide

1
2
3
4
5
6
TOP
Back Previous Next
5-2
Table of Contents
Index
Introduction
Printing
Scanning a
Document
PC Faxing
Troubleshooting
Appendix
Printer Problems
Printer does not print.
Q Is there some paper in the machine?
A Make sure paper is loaded.
Q Does the copy job stop due to out of paper?
A Load paper. The print job will start automatically
when the copy job is completed.
Q Is the toner cartridge installed correctly?
A Make sure the toner cartridge is installed correctly.
(See “Install Toner Cartridge” in the Starter Guide.)
Q Does your BIOS port setting need to be
modified?
A See your computer’s documentation concerning
available ports.
Q Is your computer working properly?
A Make sure your computer is turned on. If so, see
your computer’s documentation for
troubleshooting.
No power is supplied.
Q Is the power cord plugged in?
A Make sure the power cord is securely plugged into
both the machine and the AC outlet.
Q Is the AC outlet supplying power?
A Make sure the AC outlet is supplying power; try
another outlet if necessary.
Q Does the AC voltage match the printer?
A Make sure the voltage of the AC outlet matches the
ratings on the machine.