imageCLASS MF3200 Series Software Guide

1
2
3
4
5
6
TOP
Back Previous Next
3-38
Table of Contents
Index
Introduction
Printing
Scanning a
Document
PC Faxing
Troubleshooting
Appendix
■ Determining Resolution
The data in the image you scan is a collection of dots carrying
information about brightness and color. The density of these
dots is called “resolution,” and “dpi” (dots per inch) refers to the
number of dots in one inch.
You can specify a resolution in [Image Quality] in the MF
Toolbox settings dialog box, or in [Output Resolution] in the
ScanGear MF.
● Images for Display on a Monitor
Images for display on a monitor in general should be scanned at
a resolution of 75 dpi.
● Images for Printing
Images to be printed should be scanned at a resolution which
corresponds to the resolution of the printer.
NOTE
With a color printer, the colors are expressed as a certain percentage of
ink pigment so scanning your document at half the resolution of the
printer should be fine.
[Sound Settings] Sets the scanner to play music during
scanning or play a sound when scanning is
completed.
[Play Music During Scanning]:
If selected, the scanner plays music during
scanning. Click [Browse], then specify a
sound file.
[Play Sound When Scanning is Completed]:
If selected, the scanner plays sound when
scanning is completed. Click [Browse], then
specify a sound file.
You can specify the following files: MIDI files
(
∗
.mid,
∗
.rmi,
∗
.midi), Audio files (
∗
.wav,
∗
.aiff,
∗
.aif), MP3 file (
∗
.mp3).
[Test Scanner] Click this button, then click [Start] to check
the power cord plugged in, or the USB cable
connected between the machine and your
computer.