Specifications

1
2
3
4
5
6
TOP
Back Previous Next
1-11
Table of Contents
Index
Advanced Fax Features
Advanced Copy
Features
System Monitor
Reports and Lists
Troubleshooting
Appendix
1. Press [Additional Functions].
2. Use [ ] or [ ] to select <FAX
SETTINGS>, then press [OK].
3. Use [ ] or [ ] to select <RX SETTINGS>,
then press [OK].
4. Use [ ] or [ ] to select <REMOTE RX>,
then press [OK].
5. Use [ ] or [ ] to select <ON>, then press
[OK].
6. Use the numeric keys to enter the remote
reception ID (00 to 99), then press [OK].
7. Press [Stop/Reset] to return to standby
mode.
Receiving a Fax Remotely
The following procedure is available only when the machine
receives the tone signal.
1. When you receive a call, pick up the handset
of the external telephone.
2. Use the numeric keys to enter the two-digit
remote reception ID to start reception.
3. When the reception starts, hang up the
telephone.
■ Reducing Received Images
When a received document is divided and printed over multiple
pages of paper, the data contained in the bottom 8 mm of a
page are duplicated at the top of the following page, making the
duplicated section easier to read.
You can also print received documents in a reduced size or cut
off the end of a document that does not fit on one page.
1. Press [Additional Functions].
2. Use [ ] or [ ] to select <FAX
SETTINGS>, then press [OK].
3. Use [] or [] to select <RX SETTINGS>,
then press [OK].
4. Use [ ] or [ ] to select <RX
REDUCTION>, then press [OK].