Specifications

1
2
3
4
5
6
TOP
Back Previous Next
1-7
Table of Contents
Index
Advanced Fax Features
Advanced Copy
Features
System Monitor
Reports and Lists
Troubleshooting
Appendix
Receiving Features
You can set receive mode that suits your needs. The
machine also provides the following receiving features:
memory reception, reception restriction, and remote
reception.
■ Setting Receive Mode
To determine the right mode for you, see “Set the Machine for
Receiving Faxes (MF3240 Only),” in the Starter Guide.
1. Press [Additional Functions].
2. Use [ ] or [ ] to select <FAX
SETTINGS>, then press [OK].
3. Use [ ] or [ ] to select <RX SETTINGS>,
then press [OK].
4. Use [ ] or [ ] to select <RX MODE>,
then press [OK].
5. Use [ ] or [ ] to select the desired
receive mode, then press [OK].
<FaxOnly>: Answers all calls as faxes and disconnects voice
calls.
<AnsMode>: Receives faxes automatically and records voice
messages.
<NET SWITCH>: Distinguishes between fax and voice calls.
<FaxTel>: Switches between fax and voice calls automatically.
For optional settings, see “FaxTel: Optional Settings,” on p. 1-8.
<MANUAL>: Does not answer any calls. You have to manually
receive faxes.
NOTE
– For <FaxTel> or <MANUAL>, make sure an external telephone
is connected to the machine.
– For <AnsMode>, make sure an answering machine is
connected to the machine.
– The <NET SWITCH> mode is available for certain countries
only and requires subscription to a network switch service.
6. Press [Stop/Reset] to return to standby
mode.