Specifications

1
2
3
4
5
6
TOP
Back Previous Next
1-4
Table of Contents
Index
Advanced Fax Features
Advanced Copy
Features
System Monitor
Reports and Lists
Troubleshooting
Appendix
6. Use [ ] or [ ] to select the number of
redials the machine will make, then press
[OK].
You can also enter values with the numeric keys.
7. Use [ ] or [ ] to select the time (in
minutes) between redials, then press [OK].
You can also enter values with the numeric keys.
8. Press [Stop/Reset] to return to standby
mode.
■ Dialing Through a Switchboard
If your machine is connected to a PBX, register the [R] key so
you can easily access the outside line.
Registering the [R] Key
1. Press [Additional Functions].
2. Use [ ] or [ ] to select <FAX
SETTINGS>, then press [OK].
3. Use [ ] or [ ] to select
<COMMUNICATIONS>, then press [OK].
4. Use [ ] or [ ] to select <R-KEY
SETTING>, then press [OK].
5. Use [ ] or [ ] to select <PBX>, then
press [OK].
6. Use the numeric keys to enter the prefix
number (up to 20 digits), then press [OK].
– You can use [ ] and [Clear] to delete the numbers one by
one.
– To delete the entire number, press and hold [Clear].
7. Press [Stop/Reset] to return to standby
mode.
REDIAL TIMES
2TIMES
Ex.
REDIAL INTERVAL
2MIN.
Ex.
PRE-FIX NO.
Ex.