imageCLASS D800 Series Set-Up Instructions

Click Canon iC D800
Install
.
The Add Printer Wizard
dialog box appears. Click
Next.
Click Have Disk…in the
Manufacturers/Printer
dialog box.
The
Install From Disk
dialog box appears.
The printer selection
dialog box appears.
Click
Next.
The Printer name dialog
box appears.
Select
Use the
following port
.Select
the printer port the
machine is connected to
(usually
LPT1:
(Recommended Printer
Port)), then click
Next.
The Manufacturers/
Printers selection
dialog box appears.
Use Browse…to select
the directory that
contains the printer
driver, then click
OK.
For example, if your
CD-ROM drive is drive
D:\English\WinXP, click
Open.
Click Next.
If you want to change
printer name, type a new
name into the text box.
If you want to set this
printer as the default
printer, select
Ye s .
●
If no other printer driver
is installed on your
computer, this printer
will be set as the default
priter automatically.
Select Local printer
attached to this
computer
, then click
Next.
The printer port
selection dialog box
appears.
Automatically
detect and install my
Plug and Play printer
is
not recommended.
<Windows XP/Server 2003>
Click Ye s if you want to
print a test page, or
No if
you do not want to print
a test page, then click
Next.
If this printer is shared
with other computers,
select
Share name, and
click
Next.
You can modify the
setting after installation,
from the
Printer
Properties
dialog box.
Click Finish.
5 6
7
8
9
10
11
12
13 14
●
Depending on your computer settings, this selection may not be
displayed.
**E111MB Set-Up Sheet.qxd 7/20/04 2:39 PM Page 7