Getting Started Guide

5
2 Set Up the Machine
Do not pull the seal out at an angle.
If toner is adhered on the removed seal, be careful that
your hands or clothes do not get dirty from touching the
toner.
If your hands or clothes get dirty from touching the toner,
wash them immediately in cold water. Do not use hot
water. If you do, the toner may be set permanently.
–
–
4 Hold the front side of the operation panel with
your hands.
5 Lift the scanning platform (A) until it is locked.
(You will hear an audible “click.”)
6 Hold the grip (A) on the right front side of the
toner cover.
7 Open the toner cover.
8 Hold the toner cartridge by its handle (A).
9 Insert the toner cartridge so that the
protrusion on the right side of the toner
cartridge (A) fits into the guide (B) located on
the right side of the machine and slide it
down parallel to the guide.