Getting Started Guide

11
2 Set Up the Machine
7 Adjust the paper guide rail to match the size of
paper.
8 Aligning the protrusions (A) on the both sides of
the dust cover to the guides (B) inside the
machine, set the dust cover.
For D440, attach the document feeder tray on the
document feeder.
The default paper size/type is set to <LTR> and <PLAIN
PAPER> in the setting menu. When you load other size
and/or type of paper, change the paper size/type setting
by pressing
[Paper Settings]. For details, see
“Introduction of the Machine,” in the e-Manual.
For loading paper in the multi-purpose tray, see
“Introduction of the Machine,” in the e-Manual.
If a printout falls out of the output tray, extend the output
tray extension on the front side of the machine and set
the paper stopper upright.
–
–
–
–