User`s guide

Adding and removing devices

value (public), enter the new community names in the appropriate field. The

community names are case-sensitive.

Note: This changes the MarkVision community name, not the print server community

name. To change the print server name, refer to your print server documentation.

• click Include to add the addresses or hostname to the Devices to Include on the

Server box.

• TCP/IP address range

Enter the TCP/IP address range, beginning with the From: box and ending with the To:

box, and then click Include.

With this option you can also enter SNMP community names to change the read or write

access privileges. To Change privileges from the default value (public), enter the new

community names in the appropriate field. The community names are case-sensitive.

Note: This changes the MarkVision community name, not the print server community

name. To change the print server name, refer to your print server documentation.

• IPX network

This is the network number on which your print server resides. It is an eight-digit

hexadecimal number; for example, 000C2194. If the print server resides on the same

network as your MarkVision Server, enter 00000000 (zeros) for the network number. If

you do not know the network number of your print server, you can find it on the print

server setup page, under the NetWare settings. After you enter the address information,

click Include to add the addresses to the Devices to Include on the Server box.

7 Click OK to return the Manage Discovery Profiles screen. The entered devices are now listed

under the Include tab.

8 Click Apply.

Note: If you want to discover a device or group of devices without creating a profile, see

Adding devices.

Discovering devices

1 Go to MarkVision → Device Discovery → Manage Discovery Profiles.

2 Select the profile from the Discovery Profiles window that encompasses the devices that

you want to discover.

3 Click Start.