Printer Guide for imageCLASS 2300N

Responding to Error Messages
4-10
Tr oubleshooting
4
MEMORY OVERFLOW <Error Skip>
Cause A memory overflow has occurred.
Remedy The printer has received more data than it can hold in the available memory on
the printer. If AUTOCONT is 'on' (CONFIG MENU), the print job will resume
after 10 seconds. If AUTOCONT is 'off', you must press [OK] and the job will
continue printing, although data may be lost. Simplify the print job by deleting
unnecessary fonts or macros from the printer memory.
MRT COMPRESSION
Cause The printer is using MRT (Mean Repair Time) Compression, which can result in
a reduction in print quality (loss compression).
Remedy If this error persists, contact your service representative.
RESTORING DEFAULTS
Cause This message is displayed when <RESET=MENU> is selected in the RESET
MENU.
Remedy No action required.
OPTION RAM ERROR
Cause This is an error caused by a RAM (DIMM) installed in the printer.
Remedy Contact your service representative.
PAPER JAM
Cause A paper jam has occurred in the printer.
Remedy Remove the jammed paper. The top cover must be opened and closed to
resume printing. Press [OK] to bring the printer back online. (See Chapter 7,
"Troubleshooting," in the Reference Guide.)
TOTAL:####
Cause This message is displayed when <SHOW PAGE COUNT> is selected in the
TEST MENU. #### is the total number of pages that have been printed by the
printer.
Remedy No action required.