Printer Guide for imageCLASS 2300N

Feeder Menu
3-19
Summary of the Printer Menus
3
FEED
DRAWER1*, STACK BYPASS, DRAWER2
FEED (feed source) enables you to determine the paper source (drawer and stack
bypass). The software application selects the paper source. If the print job does
not specify the paper feed source, then FEEDER MENU settings will be used. If
the paper size you have selected is not loaded, the printer will display a message
to tell you which feed source to load the required paper size into.
STACK BYPASS
Sets the Stack Bypass as the paper feed source to function as an automatic feed
tray.
The Stack Bypass performs two important functions. Firstly, it can be used as an
automatic feed tray for standard or special media, such as transparent film or
adhesive labels. Secondly, it can also be used as a manual feed tray, for feeding
media one sheet at a time.
DRAWER1, DRAWER2
Sets the standard 250 sheet drawer as the paper feed source.
TRAY SWITCH
ON*, OFF
TRAY SWITCH enables the printer to switch paper feed to the another tray
(drawer or Stack Bypass) if the selected drawer or Stack Bypass is out of paper or
contains the wrong size paper.
ON
The printer checks the other drawers in order of capacity: standard 250 sheet
drawer or the Stack Bypass.
OFF
The printer displays an error message and asks you to load the correct paper in
the drawer.