Printer Guide for imageCLASS 2300N

Operating the Menu

2-10

Using the Printer

Press [F2] (ITEM) to display <CONFIG MENU>.

Press [F2] (ITEM) until <DENSITY> is displayed in the bottom

line.

Press [F3] (VALUE) to scroll through the values for the

DENSITY setting.

If you want to change the setting, press [F3] (VALUE) until the

value you want is displayed ➞ press [F4] (ENTER).

To use a darker setting, select a higher number. A darker setting will use more

toner. To use a lighter setting, select a lower number. A lighter setting will use less

toner.

If you want to exit or return to the item level of the menu without making any

changes, press (ITEM). If you want to exit or return to the menu level

without making any changes, press (MENU). If you want to bring the

printer back online without making any changes, press (OK).

NOTE

When the printer is ofﬂine and <PAUSED> is displayed on the LCD display, you can

cancel a job by pressing (BACK) ➞ (ENTER).